威尼斯娱人城官网

2010.09-2014.08，Texas A&M University，材料学，博士
2007.09-2010.07，中国科学院金属研究所，材料学，硕士
2003.09-2007.07, 中南大学，材料物理专业，学士

2021.01-至今，威尼斯娱人城官网 ，核科学与工程学院，长聘教轨副教授
2017.11-2020.10，University of Michigan，核工程与放射科学系（密西根离子束实验室），助理研究员
2014.08-2017.11，University of Michigan，核工程与放射科学系（密西根离子束实验室），博士后

增材制造金属及合金在核领域的应用
核反应堆结构材料
中子和离子辐照损伤与辐照效应分析
金属材料力学性能与变形机理
（常年招收硕士、博士，博士后）
在读博士生：胡华彦 huayan_hu@simonrsp.com；黎颖熹 yingxili@simonrsp.com；宁泽昊 ningzehao@simonrsp.com；赵天吉 tj_zhao@simonrsp.com.
在读研究生：王春蛟Wang-Cj@simonrsp.com.

威尼斯娱人城官网 期间
1. 增材制造316L不锈钢的辐照损伤机理与成分探索，国家自然基金面上项目，2023-2026年，负责人。
2. 国家特聘专家（青年项目），2021-2023年，负责人。
3. 面向核结构材料服役评价多参量中子同步测试新技术，国家重点研发计划“大科学装置前沿研究”重点专项，2022-2026，研究骨干。

密西根大学期间：
1. 基于3D打印的抗辐照加速应力开裂不锈钢的高通量研发，DOE-LDRD项目 #19A39-071FP，2018年10月-2020年9月, 合作主持。
2. 耐辐照加速应力腐蚀开裂3D打印不锈钢的机理，DOE-NE NSUF #20-2990 , 2020年3月-2020年9月，合作主持。
3. 核级石墨的辐照对其氧化性能的影响 DOE-NE NSUF #19-1774，2019年6月-2020年3月，主持。
4. 3D打印抗辐照损伤不锈钢的离子损伤，DOE-NE NSUF #18-1382，2018年9月-2019年3月，合作主持。
5. 镍基合金质子辐照致晶界偏析的关键评估 DOE-NE NSUF #16-610 ，2016年9月-2017年3月，主持。
6. 镍基合金中辐照加速长周期相的同步辐射研究, DOE-SCUF NSLS-II #301753, 2016年9月-12月，主持。

2023年：
1. L. Hawkins, J.Yang, M. Song, D. Schwen, Y. Zhang, L. Shao, X. Lou, L. He*, The effect of secondary phases on microstructure and irradiation damage in an as-built additively manufactured 316L stainless steel with a hafnium compositional gradient, Journal of Nuclear Materials (2023)154708.
2. S. Wang, S. Zhang, J. Xie, M. Song, W. Kuang*,The time dependence of proton irradiation effect on the intergranular oxidation of 316L stainless steel in high-temperature hydrogenated water, Acta Mater. (2023) 119340.
3. D.Jia, T. He*, M.Song, Y.Huo, H. Hu, Effects of equal channel angular pressing and further cold upsetting process to the kinetics of precipitation during aging of 7050 aluminum alloy, Journal of Materials Research and Technology 26(2023)5126-5140.
4. Y. Li, M. Song, P. Zhu, Y. Lin, Z. Qi, Y. Zhao, S. Levine, S. Zinkle*, Flash electropolishing of BCC Fe and Fe-based alloys, Journal of Nuclear Materials (2023)154672.
5. S. Wang, Q. Wang, S. Zhang, J. Xie, M. Song, W. Kuang*, Clarifying the irradiation effect on the general oxidation of 316L stainless steel in high temperature hydrogenated water after 1000h immersion, Acta Mater. 255 (2023)119100.
6. Y. Yang, H. Hu, L. Min, Q. Sun, M. Song, M. Zhu, J. Wen*, S. Tu*, Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes，International Journal of Fatigue 175（2023）107764.
7. X. Guo, S. Cong, Z. Liu, L. Zhang*, Z. Ma*, Z. Zhou, M. Song, J. Yang, Irradiaiton accelerated corrosion of alumina-forming austenitic steels in supercritical CO2: the oxide scale formed within an individual grain or affected by grain boundary, Corrosion Science 211(2023)111207.
8. M. Song*, J. Yang, X. Liu, L. Hawkins, Z.Jiao, L. He, Y. Zhang, D. Schwen, X. Lou*, Void swelling in additively manufactured 316L stainless steel with hafnium composition gradient under self-ion irradiation, Journal of Nuclear Materials 578 (2023)154351.
9. J. Yang, L. Hawkins, L. He, S. Mahmood, M. Song, K. Schulze, X. Lou*,Intragranular irradiation-assisted stress corrosion cracking (IASCC) of 316L stainless steel made by laser direct energy deposition additive manufacturing: Delta ferrite-dislocation channel interaction, Journal of Nuclear Materials 577(2023)154305.
10. Y. Huang, Z. Liu*, M. Song, M. Zhang, C. Hu, Q. Wang, H. Deng*, Atomistic insights into stress corrosion cracking of α-Fe in supercritical water: The coupling effect of hydrogen embrittlement and intergranular corrosion, Computational Materials Science 218 (2023)111991

2022年（7篇）：
1. Z. Su, J. Ding, M. Song, L. Jiang, T. Shi, Z. Li, S. Wang*, F. Gao, D. Yun, E. Ma*, C. Lu*，Atomic-scale chemical heterogeneities on radiation resistance effect in high-entropy alloy, Acta Mater.,(2022)118662.
2. S. Wang, S. Zhang, J.Xie, X. Feng, M.Song, G. Was, W. Kuang*, Clarifying the mitigation effect of proton irradiation on the intergranular oxidation of 316L stainless steel in high temperature water, Acta Mater., (2022) 118408.
3. Z. Su, T. Shi, H. Shen, L. Jiang, L. Wu, M. Song, Z. Li, S. Wang, C. Lu*, Radiation-assisted chemical short-range order formation in high-entropy alloys, Scripta Mater., (2022)114547.
4. J. Yang, X. Liu, M. Song, L. He, S. Bankson, M. Hamilton, B. Prorok, X. Lou*, Sensitization, desensitization, and carbide evolution of alloy 800H made by laser powder bed fusion, Additive Manufacturing, (2022)102547.
5.P. Deng, M. Song, J. Yang, Q. Pan, S. McAllister, L. Li, B.C. Prorok, X. Lou*, On the thermal coarsening and transformation of nanoscale oxide inclusions in 316L stainless steel manufactured by laser powder bed fusion and its influence on impact toughness, Mater. Sci. Eng. A, (2022)142690.
6. W.Kuang*, X. Feng, D.Du, M. Song, M.Wang, G.S.Was, A high-resolution characterization of irradiation-assisted stress corrosion cracking of proton-irradiated 316L stainless steel in simulated pressurized water reactor primary water, Corrosion Science, 199(2022)110187.
7. J. Pang, T.Xiong, W. Yang, H. Ge, X.Zheng, M.Song, H.Zhang, S. Zheng*, Atomic scale structure dominated FCC and B2 responses to He ion irradiation in eutectic high-entropy alloy AlCoCrFeNi2.1, Journal of Materials Science & Technology, 129(2022)87-95.

2021年（6篇）：
1.J. Yang, L.R. Hawkins, M. Song, L. He, M. Bachhav, Q. Pan, L. Shao, D. Schwen, X. Lou*, Compositionally graded specimen made by laser additive manufacturing as a high-throughput method to study radiation damages and irradiation-assisted stress corrosion cracking, Journal of Nuclear Materials (2021) 153493.
2 J. Yang, M. Song, L.R. Hawkins, X. Liu, L. He, X. Lou*, Effects of heat treatment on corrosion fatigue and stress corrosion crack growth of additive-manufactured Alloy 800H in high-temperature water, Corrosion Science,191(2021)109739.
3. L. He*, L. Hawkins, J. Yang, X. Liu, M. Song, X. Lou, Y. Zhang, L. Shao, D. Schwen, Advanced Characterization of Additively Manufactured 316L Stainless Steel for Nuclear Applications, Microscopy and Microanalysis, 27(S1) (2021)2160-2161.
4. C. Silva*, M. Song, M. Wang, K. Holliday, K. Leonard, G. Was, J. Busby, A microscopic and crystallographic study of proton irradiated alloy 718, Journal of Nuclear Materials, 551(2021) 152954.
5. L. Jiang, M. Song*, L. Yang, J. Yang, D. Du, X. Lou, Y. Chen*, A comparison study of void swelling in additively manufactured and cold-worked 316L stainless steels under ion irradiation, Journal of Nuclear Materials, 551(2021)152946. (Invited paper).
6. H. Yin, M. Song, P. Deng, L. Li, B.C. Prorok, X. Lou*, Thermal stability and microstructural evolution of additively manufactured 316L stainless steel by laser powder bed fusion at 500-800℃, Additive Manufacturing, 41(2021)101981.

2020年（7篇）：
1. P. Deng, H. Yin, M. Song, D. Li, Y. Zheng, B. C. Prorok, X. Lou*, On the Thermal Stability of Dislocation Cellular Structures in Additively Manufactured Austenitic Stainless Steels: Roles of Heavy Element Segregation and Stacking Fault Energy, JOM (2020) 1-12.
2. M. Song*, K. G. Field, R. M Cox, G.S. Was, Microstructural characterization of cold-worked 316 stainless steel flux thimble tubes irradiated up to 100 dpa in a commercial Pressurized Water Reactor, Journal of Nuclear Materials, 541 (2020) 152400.
3. W. Kuang*, M. Song, X. Feng, Insight into the acceleration in oxidation kinetics ahead of stress corrosion crack of alloy 690 in simulated PWR primary water, Corrosion Science, 176 (2020) 108943.
4. L. Jiang, Y.J. Hu, K. Sun, P. Xiu, M. Song, Y. Zhang, WL. Boldman, L.M. Wang*, Irradiation‐Induced Extremes Create Hierarchical Face‐/Body‐Centered‐Cubic Phases in Nanostructured High Entropy Alloys, Advanced Materials, 32(39)(2020) 2002652（期刊封面）
5. D. Du*, M. Song, K. Chen, L. Zhang, P.L. Andresen, Effect of deformation level and orientation on SCC of 316L stainless steel in simulated light water environments，Journal of Nuclear Materials, 531(2020) 152038.
6. L. Jiang*, D. Qiao, Z. Cao, C. Lu, M. Song*, L.Wang, Tunable mechanical property and strain hardening behavior of a single-phase CoFeNi2V0.5Mo0.2 high entropy alloy, Materials Science and Engineering A, 776 (2020) 139027.
7. X. He, M. Song, Y. Du, Y. Shi, BA Johnson, KF Ehmann, YW Chung*, Surface hardening of metals at room temperature by nanoparticle-laden cavitating waterjets, Journal of Materials Processing Technology , 275 (2020)116316.

2019年（7篇）：
1. M. Wang*, M. Song, G.S. Was, J. L. Nelson, The roles of thermal mechanical treatment and δ phase in the stress corrosion cracking of alloy 718 in primary water, Corrosion Science, 160 (2019) 108168.
2.M. Song*, C. Sun, Y. Chen, Z. Shang, J. Li, Z. Fan, K.T. Hartwig, X. Zhang*, Grain refinement mechanisms and strength-hardness correlation of ultra-fine grained Grade 91 steel processed by equal channel angular extrusion, International Journal of Pressure Vessels and Piping,172 (2019) 212-219.
3. Z. Shang, J. Ding, C. Fan, M. Song, J. Li, Q. Li, S. Xue, K.T. Hartwig, X. Zhang*, Tailoring the strength and ductility of T91 steel by partial tempering treatment, Acta Materialia, 169 (2019) 209-224.
4. L. Jiang, Y. Lu, M. Song, C. Lu*, Z. Cao, T. Wang, F. Gao, L. Wang*, A Promising CoFeNi2V0.5Mo0.2 High Entropy Alloy with Exceptional Ductility, Scripta Materialia, 165 (2019) 128-133.
5. C. R. Lear*, M. Song, M. Wang, G. S. Was, Dual ion irradiation of commercial and advanced alloys: evaluating microstructural resistance for high dose core internals, Journal of Nuclear Materials, 516 (2019) 125-134.
6. M. Song, M. Wang, X. Lou, R. B. Rebak, G. S. Was, Corrigendum to “Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels” [Journal of Nuclear Materials, 513 (2019) 33-44].
7. M. Wang*, M. Song, C. R. Lear, G. S. Was, Irradiation assisted stress corrosion cracking of commercial and advanced alloys for light water reactor core internals, Journal of Nuclear Materials, 515 (2019) 52-70.
8. M. Song*, M. Wang, X. Lou, R. B. Rebak, G. S. Was, Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels, Journal of Nuclear Materials, 513 (2019) 33-44.（2018-2019 期刊最佳论文）

2018年（4篇）：
1. M. Song*, C. R. Lear, C. M. Parish, M. Wang, G. S. Was, Radiation tolerance of commercial and advanced alloys for core internals: a comprehensive microstructural characterization, Journal of Nuclear Materials, 510 (2018) 396-413.
2. C. Lu, T. Yang, K. Jin, G. Velisa, P. Xiu, M. Song, Q. Peng, Y. Zhang, H. Bei, W. Weber, L. Wang*, Enhanced void swelling in NiCoFeCrPd high entropy alloy by indentation induced dislocations, Materials Research Letters, 6 .10 (2018) 584-591.
3. M. Song*, Y. Yang, M. Wang, W. Kuang, C. R. Lear, G.S. Was, Probing long-range ordering in nickel-base alloys with proton irradiation, Acta Materialia, 156 (2018) 446-462.
4. W. Kuang*, M. Song, G. S. Was, Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining, Acta Materialia, 151 (2018) 321-333.

2018年以前（18篇）：
1. X. Lou*, M. Song, P.W. Emigh, M.A. Othon, P.L. Andresen, On the stress corrosion crack growth behavior in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing, Corrosion Science, 128 (2017) 140-153.
2. W. Kuang*, M. Song, P. Wang, G.S. Was, The oxidation of Alloy 690 in simulated pressurized water reactor primary water, Corrosion Science, 126 (2017) 227-237.
3. C. Silva*, M. Song, K. Lenonard, M. Wang, G. Was, J. Busby, Characterization of alloy 718 subjected to different thermomechanical treatments, Materials Science and Engineering A, 691 (2017) 195-202
4. M. Song*, J. -F. Wen, Z. Jiao, G. S. Was, Elastic strain energy control of the precipitate free zone around primary carbides in nickel base alloy 725, Acta Materialia, 120 (2016) 138-149.
5. S.F. Guo*, KC. Chan, ZQ. Zhu, ZR. Wu, W. Chen, M. Song, Microstructure and tensile behavior of small scale resistance spot welded sandwich bulk metallic glasses, Journal of non-crystalline Solids, 447 (2016) 300-306
6. M. Song*, C. Sun, Z. Fan, Y. Chen, R. Zhu, K. Y. Yu, K. T. Hartwig*, H. Wang, X. Zhang*, A roadmap for tailoring the strength and ductility of ferritic/martensitic T91 steel via thermo-mechanical treatment, Acta Materialia, 112 (2016) 361-377.
7. Z. Fan, J. Jian, Y. Liu, Y. Chen, M. Song, L. Jiao, H. Wang, X. Zhang*, In situ studies on superior thermal stability of bulk FeZr nanocomposites, Acta Materialia, 101(2015)125-135
8. J. Li, KY. Yu, Y. Chen, M. Song, H. Wang, MA Kirk, M. Li, X. Zhang*, In situ study of defect migration kinetics and self-healing of twin boundaries in heavy ion irradiated nanotwinned metals, Nano Letters, 15 (2015) 2922-2927
9. Y. Chen, E. Fu, K. Yu, M. Song, Y. Liu, Y. Wang, H. Wang, X. Zhang*, Enhanced radiation tolerance in immiscible Cu/Fe multilayers with coherent and incoherent layer interfaces, Journal of Materials Research, 30 (2015) 1300-1309
10. Y. Chen, Y. Liu, E. Fu, C. Sun, KY. Yu, M. Song, J. Li, YQ. Wang, H. Wang, X. Zhang*, Unusual size-dependent strengthening mechanisms in helium ion-irradiated immiscible coherent Cu/Co nanolayers, Acta Materialia, 84 (2015)393-404
11. K. Y. Yu, Z. Fan, Y. Chen, M. Song, Y. Liu, H. Wang, MA. Kirk, M. Li, X. Zhang*, In situ observation of defect annihilation in Kr ion-irradiated bulk Fe/amorphous-Fe2Zr nanocomposite alloy, Materials Research Letters, 3 (2015) 35-42
12. Y. Chen, L. Jiao, C. Sun, M. Song, KY. Yu, Y. Liu, M. Kirk, M. Li, H. Wang, X. Zhang*, In situ studies of radiation induced crystallization in Fe/aY2O3 nanolayers, Journal of Nuclear Materials, 452 (2014) 321-327
13. M. Song, Y. D. Wu, D. Chen, X. M. Wang, C. Sun, K.Y. Yu, Y. Chen, L. Shao, Y. Yang, K. T. Hartwig*, and X. Zhang*, Response of ECAE processed ultrafine grained T91 steel subjected to high temperature heavy ion irradiation, Acta Materialia, 74 (2014) 285-295
14. M. Song, R. Zhu, D. C. Foley, C. Sun, Y. Chen, K. T. Hartwig*, X. Zhang*, Enhancement of strength and ductility in ultrafine-grained T91 steel through thermomechanical treatments, Journal of Materials Science, 48 (2013) 7360-7373.
15. M. Song, C. Sun, J. Jang, C.H. Han, T.K. Kim, K.T. Hartwig*, X. Zhang*, Microstructure refinement and strengthening mechanisms of a 12Cr ODS steel processed by equal channel angular extrusion, Journal of Alloys and Compound, 577 (2013) 247-256.
16. R. Zhu, S. Li, M. Song, I. Karaman*, R. Arroyave, Phase constitution effect on the ductility of low alloy multiphase transformation induced plasticity steels, Materials Science and Engineering A, 569 (2013)137-143
17. C. Sun, M. Song, K. Y. Yu, Y. Chen, M. A. Kirk, M. Li, H. Wang, X. Zhang*, In situ evidence of defect cluster absorption by grain boundaries in irradiated nanocrystalline Ni, Metallurgical and Materials Transaction A, 43 (2013) 1966-1974
18. Y. Chen, Y. Liu, C. Sun, KY. Yu, M. Song, H. Wang, X. Zhang*, Microstructure and strengthening mechanisms in Cu/Fe multilayers, Acta Materialia, 60 (2012) 6312-6321

辐照材料学，研究生，48学时，3学分

2018-2019年Journal of Nuclear Materials期刊最佳论文(2020年)
2020 国家特聘青年专家（第十六批）