威尼斯娱人城官网

Sept. 2009 - June 2015 PH.D., School of Mechanical Engineering, Shanghai Jiao Tong University
Tutor: Prof. Sun Fanghong Topic: Study on the deposition, tribological properties and applications of high-performance diamond films on inner hole surfaces
Sept. 2005 - Jul. 2009 Bachelor, School of Mechanical Engineering, Shanghai Jiao Tong University

Oct. 2018 - Now Associate professor, School of Mechanical Engineering, Shanghai Jiao Tong University
Sept. 2017 - Sept. 2018 Post doctor, University of California, Berkeley (UCB)
May 2015 - Sept. 2018 Post doctor, School of Mechanical Engineering, Shanghai Jiao Tong University

Sept. 2017 - Sept. 2018 Post doctor, University of California, Berkeley (UCB)

◆ Advanced manufacture/Ultra-precision machining
Abrasive flow machining (AFM), magneto-rheological finishing (MFR), plasma polishing, chemo-mechanical polishing (CMP), mechanical polishing; mainly for diamond materials, which can also be extended to other typical optical or semiconductor materials
Fabrication and application of diamond coated cutting tools, dies and wear-resistant components
◆ Micro-nano sensors
Design, fabrication and application of diamond micro-nano components (sensors, electrodes, etc.)
Fabrication, machining and application (in the quantum field) of the high-grade monocrystalline diamond containing certain color centers
◆ Surface Engineering
HFCVD and MPCVD apparatus and technologies for synthesizing diamond coatings/monocrystalline diamonds
Material modifications of diamond coatings/monocrystalline diamonds and ultra-precision/micro-nano machining

2022.01-2025.12 1. National Natural Science Foundation (52175423) Low-temperature fabrication and basic research for application of MPCVD diamond coated high-Co WC-Co micro cutting tools
2022.04-2025.03 Shanghai Natural Science Foundation (22ZR1433200) Research on limitation, mechanism and technology of abrasive flow machining micro structures
2020.11-2021.11 Huohua Project of JW Science and Technology Committee (******) Mechanism and technique for fabricating diamond with high-density NV centers for ******
2020.01-2024.01 Key-Area Research and Development Program of Guangdong Province (2020B010185001) Investigations on ultra-hard materials and applications in typical engineering projects
2019.11-2021.10 Shanghai Pujiang Program (2019PJF021) Oxidation resistance, polishing and micro-nano machining of nitrogen-doped diamond film
2018.01-2020.12 National Natural Science Foundation (51705320) Researches on mechanisms and technology of heat-assisted chemical-mechanical abrasive flow polishing diamond films on complicated surfaces
2018.10-2021.12 New- Round Discipline Construction Project in Shanghai Jiao Tong University (WF220402019) Post-treatment of diamond film surfaces and applications
2019.01-2020.12 SKL of Mechanical System and Vibration Independent Project (GKZD020029/010) Oxidation resistance, polishing and micro-nano machining of boron doped diamond films
2016.07-2019.06 China Postdoctoral Science Foundation special funded project (2016T90370) Fundamental researches on fabrication and application of one/multi-elements doped composite diamond films
2015.11-2017.10 China Postdoctoral Science Foundation (15Z102060056) Fundamental researches on fabrication, optimization and application of boron-doped composite diamond films

1. B. Zhang, X.C. Wang*, S.F. Chen, S.F. Shi, Theoretical analysis of finishing mechanism based on rheological properties and flow behaviors of abrasive media in micro-porous structures, Journal of Manufacturing Processes, Vol. 99, 2023: 513-526 (SCI).
2. Y. Qiao, S. Nie, W.H. Li, E.Z. Liu, X.C. Wang*, Cobalt diffusion during the initial stage of CVD diamond growth on cemented carbide - a molecular dynamics and experimental study, Applied Surface Science, available online, 2023 (SCI)
3. H. Wang, M. Lu, X.C. Wang, F.H. Sun*, Synthesis, characterization and cutting performances of gradient gradual changing (GGC-) MCD/SMCD/NCD/UNCD diamond coatings with tailored interfacial integrity on CFRP drilling tools, Journal of Manufacturing Processes, Vol. 85, 2023: 466-478 (SCI)
4. M. Lu, C. Zhang, X.C. Wang, F.H. Sun*, Theoretical and experimental research on growth and doping mechanisms of diamond films fabricated using liquid carbon source precursors, Applied Surface Science, Vol. 629, 2023: 157389 (12 pages)
5. B.C. Zhang, S.F. Chen, X.C. Wang*, Machining uniformity and property change of abrasive media for micro-porous structures, Journal of Materials Processing Technology, Vol. 307, 2022: 117675 (14 pages) (SCI)
6. X.C. Wang*, X. Song, B.C. Zhang, Y. Qiao, F.H. Sun, Effects of urea versus N2 addition on growth and mechanical properties of HFCVD diamond films on WC-Co substrates, Diamond and Related Materials, Vol. 215, 2022: 108999 (10 pages) (SCI)
7. B.C. Zhang, S.F. Chen, N. Khiabani, Y. Qiao, X.C. Wang*, Research on the underlying mechanism behind abrasive flow machining on micro-slit structures and simulation of viscoelastic media, Advances in Manufacturing, available online, 2022 (SCI)
8. Y. Qiao, W.H. Li, S.F. Chen, X.C. Wang*, Measurement and calibration of substrate surface temperature in hot filament chemical vapor deposition, Measurement, Vol. 205, 2022: 112147 (9 pages)
9. B.C. Zhang, Y. Qiao, N. Khiabani, X.C. Wang*, Study on rheological behaviors of media and material removal mechanism for abrasive flow machining (AFM) micro structures and corresponding simulations, Journal of Manufacturing Processes, Vol. 73, 2022: 248-259 (SCI)
10. Y. Qiao, N. Khiabani, Y.F. Xiao, X.C. Wang*, Improvement on uniformity of diamond coatings on PCB milling cutters with specific cutting edge structures, Diamond and Related Materials, Vol. 122, 2022:108827 (15pages) (SCI)
11. X. Song, M. Lu, H. Wang, X.C. Wang, F.H. Sun*, Fracture mechanics of microcrystalline/nanocrystalline composited multilayer chemical vapor deposition self-standing diamond films, Ceramics International, Vol. 48, 2022: 21868-21878 (SCI)
12. X. Song, H. Wang, X.C. Wang, F.H. Sun*, Erosion mechanism and cutting performance of MPCVD multilayer diamond thick film-Si3N4 brazed insert, International Journal of Advanced Manufacturing Technology, Vol. 118, 2022: 2437-2451 (SCI)
13. X.C. Wang*, B.C. Zhang, Y. Qiao, F.H. Sun, Chemo-mechanical abrasive flow machining (CM-AFM): A novel high-efficient technique for polishing diamond thin coatings on inner hole surfaces, Journal of Manufacturing Processes, Vol. 69, 2021:152-164 (SCI)
14. X.C. Wang*, Y. Qiao, K. Larsson, F.H. Sun, Energetic stability and geometrical structure of variously terminated and N-doped diamond (111) surfaces – a theoretical DFT study, Materials Chemistry and Physics, Vol. 262, 2021:124283 (SCI)
15. X.C. Wang*, Y. Qiao, X. Song, F.H. Sun, Determination of carbonization depths in Ti substrates in diamond growth atmospheres and modified diffusion models, Journal of Alloys and Compounds, Vol. 860, 2021: 157904 (SCI)
16. B.C. Zhang, X.C. Wang*, X.J. Jia*, Research on the mechanism of molten salt cleaning (MSC) for multiple contaminants in cylinder covers, Journal of Cleaner Production, Vol. 302, 2021: 126990 (12 pages) (SCI)
17. H. Wang, X. Song, X.C. Wang, F.H. Song*, Fabrication, tribological properties and cutting performances of high-quality multilayer graded MCD/NCD/UNCD coated PCB end mills, Diamond and Related Materials, Vol. 118, 2021: 108505 (17 pages) (SCI)
18. X. Song, H. Wang, X.C. Wang, F.H. Sun*, Coupling effects of methane concentration and nitrogen addition level on morphologies and properties of MPCVD diamond films on WC-Co substrates, Diamond and Related Materials, Vol. 117, 2021:108487 (12 pages) (SCI)
19. X. Song, H. Wang, X.C. Wang, F.H. Sun*, Fabrication and evaluation of diamond thick film-Si3N4 brazed cutting tool by microwave plasma chemical vapor deposition method, Journal of Materials Processing Technology, Vol. 291, 2021: 117034 (SCI)
20. H. Wang, X. Song, X.C. Wang, F.H. Sun*, Tribological performance and wear mechanism of smooth ultrananocrystalline diamond films, Journal of Materials Processing Technology, Vol. 290, 2021: 116993 (SCI)
21. C.C. Wang, X.C. Wang, X.T. Shen, F.H. Sun*., Synthesis and evaluation of high-performance diamond films with multilayer structure on printed circuit board drills, Diamond and Related Materials., Vol. 112, 2021: 108249 (SCI)
22. H. Wang, C.C. Wang, X.C. Wang, F.H. Sun*, Effects of carbon concentration and gas pressure with hydrogen-rich gas chemistry on synthesis and characterizations of HFCVD diamond films on WC-Co substrates, Surface and Coatings Technology, Vol.409, 2021:126839 (SCI)
23. X. Song, C.C. Wang, X.C. Wang, F.H. Sun*, Mass production of HFCVD diamond-coated wire-drawing dies without filament through the hole, Surface Review and Letters, Vol.28, 2021: 2150006 (14 pages) (SCI)
24. X.T. Shen, X. Song, X.C. Wang, F.H. Sun*, Grinding characteristics of CVD diamond grits in single grit grinding of SiC ceramics, International Journal of Advanced Manufacturing Technology, Vol.114, 2021: 2783-2797 (SCI)
25. X.C. Wang*, X. Song, H. Wang, Y. Qiao, K. Larsson, F.H. Sun, Selective control of oxidation resistance of diamond by dopings, ACS Applied Materials & Interfaces, Vol. 12, 2020: 42302-42313 (SCI)
26. X.C. Wang*, Y. Qiao, F.H. Sun, Influences of Si dopant on geometry and energetic stability of terminated diamond (111)-1x1 surfaces, Diamond and Related Materials, Vol. 109, 2020: 108014 (SCI)
27. Juhong Chen*, Chun-Yen Liu, Xinchang Wang, Eric Sweet, Nathaniel Liu, Xiaohua Gong, Liwei Lin*, 3D printed microfluidic devices for circulating tumor cells (CTCs) isolation, Biosensors and Bioelectronics, Vol.150, 2020: 111900 (SCI)
28. H. Wang, X.T. Shen, X.C. Wang, F.H. Sun*, Simulation and experimental researches on the substrate temperature distribution of the large-capacity HFCVD setup for mass-production of diamond coated milling tools, Diamond and Related Materials, Vol. 101, 2020: 107610 (SCI)
29. X.C. Wang*, C.C. Wang, X.T. Shen, K. Larsson, F.H. Sun, DFT calculations of energetic stability and geometry of O-terminated B- and N-doped diamond (111)-1x1 surfaces, Journal of Physics: Condensed Matter, Vol.31, 2019: 265002 (SCI)
30. X.C. Wang*, C.C Wang, X.T. Shen, F.H. Sun, Tribological behaviors of the diamond films sliding against the T800/X850 CFRP laminates, Wear, Vol.418-419, 2019: 191-200 (SCI)
31. X.T. Shen, X.C. Wang, F.H. Sun*, Fabrication and evaluation of monolayer diamond grinding tools by hot filament chemical vapor deposition method, Journal of Materials Processing Technology, Vol.265, 2019: 1-11 (SCI)
32. X.C. Wang*, C.C. Wang, C.Y. Wang, F.H. Sun, Approach for polishing diamond coated complicated cutting tool: Abrasive flow machining (AFM), Chinese Journal of Mechanical Engineering, Vol. 31, 2018: 97 (SCI)
33. X.C. Wang*, C.C. Wang, W.K. He, F.H. Sun, Co evolutions for WC-Co substrates with different Co contents during pretreatment and HFCVD diamond film growth processes, Transactions of Nonferrous Metals Society of China, Vol. 28, 2018: 469-486 (SCI)
34. X.C. Wang*, X.T. Shen, C. Zeng, F.H. Sun, Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining, Surface and Coatings Technology, Vol. 347, 2018: 390-397 (SCI)
35. X.C. Wang*, C.C. Wang, F.H. Sun, B. Shen, Development and growth time optimization of the boron-doped micro-crystalline, undoped micro-crystalline and undoped fine-grained composite diamond film, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.232, 2018: 1244-1258 (SCI)
36. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, High-speed drawing of al alloy wire by diamond-coated drawing die under environmentally friendly water-based emulsion lubrication, Journal of Manufacturing Science and Engineering, Vol. 140, 2018: 124502 (SCI)
37. X.C. Wang, C.C. Wang, F.H. Sun*, C.Y. Ding, Simulation and experimental researches on HFCVD diamond film growth on small inner-hole surface of wire-drawing die with no filament through the hole. Surface and Coatings Technology, Vol. 339, 2018: 1-13 (SCI)
38. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, Tribological properties of diamond films for high-speed drawing Al alloy wires using water-based emulsions, Tribology International, Vol. 123, 2018: 92-104 (SCI)
39. C.C. Wang, X.C. Wang, F.H. Sun*, Fabrication and application of nano/microcrystalline composite diamond coated drawing dies using alternative carbon sources, Transactions of Nonferrous Metals Society of China, Vol.28, 2018: 1602-1610 (SCI)
40. C.C. Wang, X.C. Wang, F.H. Sun*. Tribological behavior and cutting performance of monolayer, bilayer and multilayer diamond coated milling tools in machining of zirconia ceramics. Surface and Coatings Technology, Vol.353, 2018: 49-57 (SCI)
41. T.Q. Zhao, X.C. Wang, F.H. Sun*, The effects of boron doping on residual stress on HFCVD diamond film for MEMS applications, Surface Review and Letters, Vol.25, 2018: 1850039 (SCI)
42. X.C. Wang*, X.T. Shen, J.F. Gao, F.H. Sun, Consecutive deposition of amorphous SiO2 interlayer and diamond film on graphite by chemical vapor deposition, Carbon, Vol. 117, 2017: 126-136 (SCI)
43. X.C. Wang*, X.T. Shen, G.D. Yang, F.H. Sun, Evaluation of boron-doped-microcrystalline/nanocrystalline diamond composite coatings in drilling of CFRP. Surface and Coatings Technology, Vol. 330, 2017: 149-162 (SCI)
44. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Influence of boron doping level on basic properties and erosion behavior of boron-doped micro-crystalline diamond (BDMCD) film, Diamond and Related Materials, Vol.73, 2017: 218-231 (SCI)
45. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, Potential material for fabricating optical mirrors: polished diamond coated silicon carbide, Applied Optics, Vol.56, 2017: 4113-4122 (SCI)
46. X.T. Shen, X.C. Wang, F.H. Sun*, C.Y. Ding, Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates, Diamond and Related Materials, Vol.73, 2017: 7-14 (SCI)
47. X.C. Wang*, C.C. Wang, F.H. Sun, B. Shen, Investigations on the fabrication and application of the diamond coated drawing die with small aperture, Superhard Materials Engineering, Vol.29 Issue.1, 2017: 35-42 (in Chinese)
48. T.Q. Zhao, X.C. Wang, F.H. Sun*, Investigation on deposition and patterning of low residual stress HCVD boron-doped diamond film, Diamond & Abrasive Engineering, Vol.37 Issue.1, 2017: 29-33 (in Chinese)
49. C.Y. Ding, F.H. Sun*, X.C. Wang, Growth of diamond coatings in wire-drawing die by modified hot filament chemical vapor deposition: a simulation and experimental study, Chinese Journal of Vacuum Science and Technology, Vol.37, Issue.6, 2017: 1-7 (EI in Chinese)
50. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Mechanical properties and erosion performances of MCD films synthesized using different carbon sources by BE-HFCVD, International Journal of Refractory Metals and Hard Materials, Vol.54, 2016: 370-377 (SCI)
51. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Simulation optimization of filament parameters for uniform depositions of diamond films on surfaces of ultra-large circular holes, Applied Surface Science, Vol.388, 2016: 593-603 (SCI)
52. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Tribological properties of MCD films synthesized using different carbon sources when sliding against stainless steel, Tribology Letters, Vol.61, 2016: 1-16 (SCI)
53. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Tribological properties of SiC-based MCD films synthesized using different carbon sources when sliding against Si3N4, Applied Surface Science, Vol.369, 2016: 448-459 (SCI)
54. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Growth time optimization of fine grained diamond coated drills for machining CFRP, Materials Science Forum, Vol.836-837, 2016: 333-339
55. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Uniform deposition of chemical vapor deposition diamond films on slender tungsten wires, Materials Science Forum, Vol.848, 2016: 618-623
56. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Production and application of composite diamond film coated PAP drawing die (A), Superhard Materials Engineering, Vol.28 Issue.2, 2016: 20-23 (in Chinese)
57. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Production and application of composite diamond film coated PAP drawing die (B), Superhard Materials Engineering, Vol.28 Issue 3, 2016: 35-40 (in Chinese)
58. X.C. Wang*, C.C. Wang, F.H. Sun, B. Shen, Fabrication, polishing and application of diamond coated compacting die with a sector-shaped hole, China Surface Engineering, Vol.29 Issue.6, 2016: 75-82 (EI in Chinese)
59. X.T. Shen, B. Shen, X.C. Wang, T.Q. Zhao, F.H. Sun, Preparation of CVD microcrystalline diamond powders on Cu substrates, Diamond & Abrasives Engineering, Vol.36, Issue.6, 2016: 20-24 (in Chinese)
60. X.C. Wang, T.Q. Zhao, F.H. Sun*, B. Shen, Comparisons of HFCVD diamond nucleation and growth using different carbon sources, Diamond and Related Materials, Vol.54, 2015: 26-33 (SCI)
61. X.C. Wang, Z.C. Lin, B. Shen, F.H. Sun*, Effects of deposition parameters on HFCVD diamond films growth on inner hole surfaces of WC-Co substrates, Transactions of Nonferrous Metals Society of China, Vol.25, 2015: 791-802 (SCI)
62. X.C. Wang, L. Wang, B. Shen, F.H. Sun*, Friction and wear performance of boron doped, undoped microcrystalline and fine grained composite diamond films, Chinese Journal of Mechanical Engineering, Vol.28, 2015: 155-163 (SCI)
63. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Investigations on mechanical property of HFCVD boron-doped composite diamond film, Diamond & Abrasives Engineering, Vol.35, 2015: 8-13 (in Chinese)
64. J. Xu, X.C. Wang*, Studies on coated cutting tools and processes for internal thread milling the super-strength steel, Journal of Wuhan Textile University, Vol.28, Issue.6, 2015: 90-94 (in Chinese)
65. X.C. Wang, J.G. Zhang, B. Shen, T. Zhang, F.H. Sun*, Erosion mechanism of the boron-doped diamond films of different thicknesses, Wear, Vol.312, 2014:1-10 (SCI)
66. X.C. Wang, Y.X. Cui, J.G. Zhang, B. Shen, F.H. Sun*, Erosive wear performance of boron doped diamond films on different substrates, Proceedings of the Institution of Mechanical Engineers, Part J: Engineering Tribology, Vol.228, 2014: 352-361 (SCI)
67. X.C. Wang, J.G. Zhang, B. Shen, T. Zhang, F.H. Sun*, Fracture and solid particle erosion of micro-crystalline, nano-crystalline and boron-doped diamond films, International Journal of Refractory Metals and Hard Materials, Vol.45, 2014: 31-40 (SCI)
68. X.C. Wang, X.L. Lei, L. Cheng, F.H. Sun*, B. Shen, Simulation-based optimal design of HFCVD equipment adopted for mass production of diamond films on inner-hole surfaces, Surface Review and Letters, Vol.20, 2014: 1450066-1-14 (SCI)
69. J.G. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Effect of deposition parameters on micro- and nano-crystalline diamond films growth on WC-Co substrates by HFCVD, Transactions of Nonferrous Metals Society of China, Vol.24, 2014: 1-8 (SCI)
70. J.J. Liu, T. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Simulation and experimental research on substrate temperature distribution in HFCVD diamond film growth on seal’s end surface, Diamond & Abrasives Engineering, Vol.34 Issue.2, 2014: 1-5 (in Chinese)
71. L. Cheng, J.G. Zhang, X.C. Wang, T. Zhang, B. Shen, F.H. Sun*, Simulated optimization of the deposition parameters for the mass production of diamond coated drills using HFCVD method, Journal of Shanghai Jiaotong University, Vol.48 Issue.11, 2014: 1600-1605 (in Chinese)
72. X.C. Wang, Z.C. Lin, T. Zhang, B. Shen, F.H. Sun*, Fabrication and application of boron-doped diamond coated rectangular-hole shaped drawing dies, International Journal of Refractory Metals and Hard Materials, Vol.41, 2013: 422-431 (SCI)
73. X.C. Wang, J.G. Zhang, F.H. Sun*, T. Zhang, B. Shen, Investigations on the fabrication and erosion behavior of the composite diamond coated nozzles, Wear, Vol.304, 2013: 126-137 (SCI)
74. X.C. Wang, T. Zhang, B. Shen, J.G. Zhang, F.H. Sun*, Simulation and experimental research on the substrate temperature distribution in HFCVD diamond film growth on the inner hole surface, Surface and Coatings Technology, Vol.219, 2013: 109-118 (SCI)
75. X.C. Wang, J.G. Zhang, T. Zhang, B. Shen, F.H. Sun*, Simulation optimization of the heat transfer conditions in HFCVD diamond film growth inside holes, Surface Review and Letters, Vol.20, 2013: 1350031-1-13 (SCI)
76. J.G. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP, International Journal of Refractory Metals and Hard Materials, Vol.41, 2013: 285-292 (SCI)
77. J.G. Zhang, T. Zhang, X.C. Wang, B. Shen, F. H. Sun*, Simulation and experimental studies on substrate temperature and gas density field in HFCVD diamond films growth on WC-Co drill tools, Surface Review and Letters, Vol.20, 2013: 1350020-1-10 (SCI)
78. T. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Z.M. Zhang, The effect of deposition parameters on the morphology of micron diamond powders synthesized by HFCVD method, Journal of Crystal Growth, Vol.372, 2013: 49-56 (SCI)
79. X.C. Wang*, S.L. Chen, B. Shen, F.H. Sun, Frictional and wear behavior of micro-crystalline and nano-crystalline diamond films, Advanced Materials Research, Vol.797, 2013: 719-724
80. L. Cheng, J.G. Zhang, X.C. Wang, T. Zhang, B. Shen, F.H. Sun*, Simulation of temperature distribution in HFCVD diamond films growth on WC-Co drill tools in large quantities, Key Engineering Materials, Vol.589-590, 2013: 399-404
81. X.C. Wang*, B. Shen, F.H. Sun, Z.M. Zhang, H.S. Shen, S.S. Guo, Deposition and application of CVD diamond films on the interior-hole surface of silicon carbide compacting dies, Key Engineering Materials,Vol.499, 2012: 45-50
82. X.C. Wang*, B. Shen, F.H. Sun, Deposition and characterization of boron-doped HFCVD diamond films on Ti, SiC, Si and Ta substrates, Applied Mechanics and Materials, Vol.217-219, 2012: 1062-1067
83. X.C. Wang*, B. Shen, F.H. Sun, CVD diamond films as wear-resistant coatings for relief valve components in the coal liquefaction equipment, Solid State Phenomena, Vol.175, 2011: 219-225
84. X.C. Wang*, F.H. Sun, B. Shen, Z.M. Zhang, S.S. Guo, Deposition and application of nanocrystalline diamond films on silicon carbide substrates, Nano-Micro Letters, Proceedings of Shanghai International Nanotechnology Cooperation Symposium, Special Issue, 2011: 29-32
85. X.C. Wang, F.H. Sun*, L.S. Sun, Q.H. Ding, D.H. Peng, Simulation and optimal design of high-pressure-differential and high-solid-phase relief valves, Journal of Shanghai Jiaotong University, Vol.45, 2011: 1597-1601 (EI in Chinese)
86. X.C. Wang, F.H. Sun*, B. Shen, D.H. Peng, Z.M. Zhang, Fabrication and application of CVD diamond coated relief valve components in coal liquefaction, Diamond & Abrasives Engineering, Vol.31, 2011: 20-24 (in Chinese)
87. T.Q. Zhao, W.S. Wang, X.C. Wang, F.H. Sun*, B. Shen, Comparison of residual stress in boron-doped MCD and NCD films deposited on Si substrates for MEMS manufacture, The 16th International Manufacturing Conference in China (IMCC), 2015: 1094-1100 (conference paper)
88. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Cutting performance of abrasive flow machined NCD coated milling tools in peripheral finish-milling aluminum alloy, The 16th International Manufacturing Conference in China (IMCC), 2015: 73-79 (conference paper)
X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Fabrication and mirror polishing of SiC based HFCVD diamond films, The 18th Chinese Conference of Abrasive Technology (CCAT), 2016: 13-18 (conference paper in Chinese)

1. 2020, F16 Thesis project for undergraduate, Bench tests on the reliability and durability of the power battery system (3 students)
2. 2020, F17 Undergraduate tutor (1 student)
3. 2020, 37th PRP project, Design and fabrication of the diamond micro-pressure sensor (1 student)
4. 2020, Scientific internship in summer vacation, Performance control and precision machining of the diamond and the applications in MEMS (2 students)
5. 2020, Scientific internship in summer vacation, Design of differential capacitance micro sensors based on theoretical calculations and simulations (1 student)
6. 2020, Fall semester, Design and Manufacturing II, Project Exhibition the second award*1, the third award*2
7. 2021, F18 Undergraduate tutor (2 students)
8. 2021, Fall semester, Design and Manufacturing II, Project Exhibition winning award*4, the best popularity award*1
9. 2022, F18 Thesis project for undergraduate, Design of automatic unloading device for logistics (2 students)
10. 2022, F19 Undergraduate tutor (4 students)
11. 2022, Fall semester, Design and Manufacturing II, Project Exhibition the second award*1, winning award*1, the best popularity award*1
12. 2023, F19 Thesis project for undergraduate, Research on the laser machining of high-grade monocrystalline diamond (2 students)
13. 2023, F20 Undergraduate tutor (2 students)
14. 2023, F21 Undergraduate tutor (3 students)

1. F.H. Sun, X.C. Wang, H. Wang, Method for the mass production of the diamond coated complicated cutting tools by HFCVD, China, ZL201711280418.2 (authorized)
2. F.H. Sun, X.T. Shen, X.C. Wang, S.S. Guo, W.H. Zhang, R. Guo, Method for fabricating monolayer diamond abrasive tools by chemical vapor deposition, China, ZL201710072261.8 (authorized)
3. X.T. Shen, F.H. Sun, X.C. Wang, S.S. Guo, W.H. Zhang, R. Guo, Pretreatment method for depositing diamond films on WC-Co substrates, ZL201610920894.5 (authorized)
4. X.C. Wang, S.S. Guo, F.H. Sun, B. Shen, Z.M. Zhang, W.H. Zhang, Preparation method for the diamond coated spray flux nozzle used under the high-temperature and high-pressure condition, China, ZL201410005575.2 (authorized)
5. F.H. Sun, D.H. Peng, Z.M. Zhang, S.S. Guo, X.C. Wang, B. Shen, Preparation method for the diamond coated valve used under the high-temperature and high-pressure condition, China, ZL201110330198.6 (authorized)

1. National Natural Science Foundation of China, Reviewer
2. “Diamond & Abrasives Engineering” Editorial Board Young Member
3. Guest Editor of Special Issue "Design, Fabrication and Application of Diamond-based Coatings" (Materials)
4. Ministry of Education Undergraduate Education Teaching Audit and Evaluation Expert (Young teachers)
5. 2018-Now, The Optical Society of America, Member
6. Nano Letters, Carbon, Material Letters, Tribology International, Journal of Materials Processing Technology, Materials & Design, Surface and Coatings Technology, Diamond and Related Materials, Applied Surface Science, Measurement, Journal of Alloys and Compounds, Chinese Journal of Aeronautics, and et al., Reviewer

1. 2011, Shanghai Jiao Tong University, the scholarship for incoming PhD student
2. 2011, Shanghai Jiao Tong University, Showa Denko Scholarship (First Award)
3. 2013, National Scholarship for Graduate Students
4. 2013, Shanghai Jiao Tong University, Foundation for Fostering Excellent Doctoral Dissertation
5. 2013, Shanghai Jiao Tong University, the 16thacademic forum for PhD students, award for the excellent report
6. 2014, National Scholarship for Graduate Students
7. 2015, Shanghai Excellent Graduate
8. 2016, The International Conference on Surface Finishing Technology and Surface Engineering, Oral Presentation, First Award
9. 2016, China Conference on the Application of Diamond and Related Materials, Outstanding Paper
10. 2017, Conference of Machining & Advanced Manufacturing Technology, Outstanding Paper
11. 2017, Shanghai Jiao Tong University, Post-doctor Assessment, Excellence
12. 2019, Conference of Machining & Advanced Manufacturing Technology, Outstanding Paper
13. 2019, Shanghai Pujiang Talent
14. 2019, Shanghai Jiao Tong University, Advanced Individual of Undergraduate Enrollment
15. 2020, 6th China International ‘Internet Plus’ Innovation and Entrepreneurship Competition, Excellent Advisor
16. 2020, 6th China International ‘Internet Plus’ Innovation and Entrepreneurship Competition, National Silver Award, Shanghai Gold Award
17. 2020, Shanghai Jiao Tong University, Excellent Social Practice Instructor
18. 2020, Shanghai Jiao Tong University, Excellent Class Advisor
19. 2021, Shanghai Jiao Tong University, School of Mechanical Engineering, Teaching Competition for young Teachers, First Award
20. 2021, Shanghai Jiao Tong University, School of Mechanical Engineering, Class Advisor Annual Evaluation, Excellence (F19, 1/21)
21. 2022, The 10th National Mechanical Innovation Design Competition for College Students, First Award
22. 2022, The 11th Shanghai Mechanical Innovation Design Competition for College Students, First Award*2
23. 2022, Shanghai Jiao Tong University, Advanced Individual of Undergraduate Enrollment
24. 2022, Shanghai Jiao Tong University, School of Mechanical Engineering, Class Advisor Annual Evaluation, Excellence (F19, 2/21)
25. 2022, Shanghai Jiao Tong University, Teaching Competition for young Teachers, First Award
26. 2022, National Teaching Achievement Award, Second Award (12th)
27. 2023, The 6th Mechanical Education Union of Excellent Engineers “Jingdiao Cup” Undergraduate Thesis Project, Bronze Medal