威尼斯娱人城官网

2003-2007, Shanghai Jiao Tong University, Ph.D.
1999-2003, Nanjing University of Science and Technology, Bachelor

2012 - Present Associate Professor, Shanghai Jiao Tong University
2009 - 2012 Lecturer, Shanghai Jiao Tong University
2008 - 2009 Alexander von Humboldt Research Fellow, BIAS- Bremer Institut für angewandte Strahltechnik GmbH, Bremen, Germany

• Ultrafast laser material processing, including drilling, ablation and welding.

• Indirectly coupled mechanical and thermal forming of undevelopable curved plate with large curvatures used in shipbuilding, National Natural Science Foundation of China. 2018-2021 (PI)
• Intelligent laser forming of curved plates. Joint fund for equipment and shipbuilding. 2017-2018 (PI)
• Interaction between solid and fluid in nuclear pump. Major State Basic Research Development Program of China, 2015-2019 (Co-PI)
• Experiment study on gap annular flow. National key scientific and technological project, 2015-2016 (PI)
• Laser forming of non-developable surface, The State Key Laboratory of Mechanical System and Vibration, 2015-2016 (PI)
• Development and industrialization of ultra-precision bearing. The union of industry-study-research project, 2013-2016 (Co-PI)
• Study on two-directional deformation in laser thermal adjustment of two-bridge actuators, National Natural Science Foundation of China, 2012-2014 (PI)
• Study on rolling friction mechanism and heating law of rolling functional components. National key scientific and technological project, 2012-2014 (PI)
• The deformation behaviors of laser micro-adjustment of two-bridge actuators in micro systems, Specialized Research Fund for the Doctoral Program of Higher Education, 2012-2013 (PI)
• Cooling water analysis in canned-motor pump. Sub-project of National Science and Technology Major Project, 2011-2012 (Co-PI)
• The mechanism of Laser micro-adjustment of actuators in micro-scale, The State Key Laboratory of Mechanical System and Vibration, 2010-2012 (PI)
• Study on the unexpected deformation in laser forming, National Natural Science Foundation of China, 2010-2012 (Co-PI)

2019
1.Kai Zhao, Han Wang, Jingwen Yan, Hong Shen*. Welding fused silica glass by picosecond pulsed laser with low numerical aperture. ASME-Journal of Micro and Nano-Manufacturing, 2019, 7(4): 041007-8.
2.Jing Zhou, Conghao Liao, Hong Shen*, Xiaohong Ding. Surface and property characterization of laser polished Ti6Al4V. Surface and Coatings Techonlogy, 2019, 380: 125016-8
3.Jiacheng Song, Hong Shen*, Zhenqiang Yao. A new strategy for laser trepanning of tapered microholes. ASME-Journal of Micro and Nano-Manufacturing, 2019, 7(3): 031005.
4.Han Wang, Hong Shen*, Zhenqiang Yao. A two-step model for multiple picosecond and femtosecond pulses ablation of fused silica. ASME-Journal of Manufacturing Science and Engineering, 2019, 141(6): 061004-10
5.Hong Shen*, Juan Jiang, Decai Feng, Chen Xing, Xiaofeng Zhao*, Ping Xiao. Environmental effect on cracking behavior of YSZ during laser drilling. ASME-Journal of Manufacturing Science and Engineering, 2019, 141(5): 054501-5
6.Hong Shen*, Decai Feng. Thermal and mechanical behavior in laser trepan drilling of yttria-stabilized zirconia. ASME-Journal of Heat Transfer, 2019, 141(4): 042101-12.
7.Decai Feng, Hong Shen*. Hole quality control in underwater drilling of yttria stabilized zirconia using a picosecond laser. Optics & Laser Technology, 2019, 113: 141-149

2018
1.Jingwen Yan, Han Wang, Hong Shen*. Experiment-based quantitative analysis of picosecond pulse induced morphological changes in fused silica. ASME-Journal of Micro and Nano-Manufacturing, 2018, 6(4): 044501-5
2.Hong Shen*, Han Wang, Wentao Zhou. Process modelling in laser forming of doubly-curved sheets from cylinder shapes. Journal of Manufacturing Processes, 2018, 35: 373-381
3.Hong Shen*, Wentao Zhou, Han Wang. Laser forming of doubly curved plates using minimum energy principle and comprehensive strain control. International Journal of Mechanical Sciences, 2018, 145: 42-52.

2017
1. Han Wang, Hong Shen*. A prediction model for ablation fluence threshold in Femtosecond laser processing of fused silica. ASME-Journal of Micro and Nano-Manufacturing, 2017, 5(3): 031006-8.
2. Hong Shen*, Yanqing Pan, Jing Zhou, Zhenqiang Yao. Forming mechanism of bump shape in pulsed laser melting of stainless steels. ASME-Journal of Heat Transfer, 2017, 139(6): 062301-10.
3. Chi Zhang, Jing Zhou, Hong Shen*. Role of capillary and thermocapillary forces in laser polishing of metals. ASME-Journal of Manufacturing Science and Engineering, 2017, 139(4): 041019-11.
4. Hong Shen*, Decai Feng, Zhenqiang Yao. Modelling of underwater laser drilling of alumina. ASME-Journal of Manufacturing Science and Engineering, 2017, 139(4): 041008-10.

2016
1. Hong Shen*, Yutao Zheng, Han Wang and Zhenqiang Yao. Heating Position Planning in Laser Forming of Single Curved Shapes Based on Probability Convergence. ASME-Journal of Manufacturing Science and Engineering, 2016, 138(9): 091003-7
2. Hong Shen*, Han Wang, Jun Hu and Zhenqiang Yao. Processing Optimization in Multi Heating Positions for Laser Thermal Adjustment of Actuators. ASME-Journal of Manufacturing Science and Engineering, 2016, 138(6): 061012-10
3. Hong Shen*, Han Wang, Jun Hu, Zhenqiang Yao. An elastic approach for developing non-developable sheets. International Journal of Mechanical Sciences, 2016, 106: 138-146
4. Jing Zhou, Hong Shen*, Yanqing Pan, Xiaohong Ding. Experimental study on laser microstructures using long pulse. Optics and Lasers in Engineering, 2016, 78: 113-120

2015
1.Hong Shen*, Han Wang, Jun Hu, Zhenqiang Yao. The process planning in laser thermal adjustment of three cut-outs actuators. International Journal of Precison Engineering and Manufacturing, 2015, 16(12): 2475-2482
2.Hong Shen*, Jun Hu, Zhenqiang Yao. The interactive effects on deformation behavior in laser thermal adjustment of two-bridge actuators. International Journal of Machine Tools and Manufacture, 2015, 90: 1-7

2014
1. Hong Shen*, Maoli Ran, Jun Hu, Zhenqiang Yao. An experimental investigation of underwater pulsed laser forming. Optics and Lasers in Engineering, 2014, 62: 1-8.
2. Hong Shen*, Jun Hu and Zhenqiang Yao. Mixed-dimensional coupling modeling for laser forming process. Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, 2014, 228(16): 2950-2959.

2012
1.Hong Shen*, Jun Hu, Xiang Yu, Zhenqiang Yao. The effects of cut-out on stress distribution and deformations in laser thermal adjustment. International Journal of Machine Tools & Manufacture, 2012, 62: 46–52
2.Hong Shen*, Jun Hu, Zhenqiang Yao. Analysis and prediction of the in-plane deformation in laser thermal adjustment. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 2012, 134(4), 044503-5
3.Hong Shen*, Chunming Gong, Jun Hu, Zhenqiang Yao. Numerical and experimental study on bi-direction deformations in laser micro forming of two-bridge actuators. International Journal of Machine Tools & Manufacture, 2012, 54-55: 66–72

2011
1.Hong Shen*, Zhenqiang Yao (2011). Numerical and Experimental Investigation of Cooling Time in Laser Micro-adjustment of Two-bridge Actuators. Applied Thermal Engineering, 31: 1447-1456

2010
1.Hong Shen*, Linfa Peng, Jun Hu, Zhenqiang Yao (2010). Study on the mechanical behavior of laser micro-adjustment of two-bridge actuators. Journal of Micromechanics and Microengineering, 20, 115010
2.Hong Shen*, Jun Hu, Zhenqiang Yao (2010). Analysis and control of edge effects in laser bending. Optics and Lasers in Engineering, 48, (3): 305–315

2009
1.Hong Shen*, Frank Vollertsen (2009). Modelling of laser forming-An review. Computational Materials Science, 46, (4): 834-840
2.Hong Shen* and Zhenqiang Yao (2009). Study on mechanical properties after laser forming. Optics and Lasers in Engineering, 47, (1): 111–117.

• Introduction to Engineering (Undergraduate)
• Manufacturing process I (Undergraduate)

None

None

2008 Humboldt scholar
2010 The Shanghai Science and Technology Advancement Award (2nd Prize)
2013 The Shanghai Science and Technology Advancement Award (3rd Prize)
2016 The Shanghai Technology Invention Award (1st Prize)