威尼斯娱人城官网

1990-1994, Central South University of Technology, Doctor
1987-1990, Lanzhou Railway Institute, Master
1980-1984, Chongqing University, Bachelor

2010-2017, Assistant President of Shanghai Jiao Tong University
2002-2010, Executive Director of Science and Technology division of Shanghai Jiao Tong University
2002—present, Director of Institute of Mechatronic Design and Knowledge Based Engineering, Shanghai Jiao Tong University
1997—present, Professor, Shanghai Jiao Tong University
1995—2001, Associate Professor, Associate dean, Department of Plastic Forming, Shanghai Jiao Tong University
1993—1995, Postdoctor,Department of Plastic Forming, Shanghai Jiao Tong University.

2012-present, Visiting Professor of National University of Singapore
2008-present, Ford Professor of Ford Motor Company

Knowledge-based Engineering
Plastic forming theory and simulation technology
Machine learning and mechatronics design

1）2004-2006,Natural Science Foundation of China (No. 50375095),“Whole process dynamic simulation technology of roll forming processes”.
2）2007-2010,Key project of Natural Science Foundation of China, Research on several basic problems of materials intelligent net forming".
3）2006-2008,the State Key Fundamental Pre-research Project,"Research on new forming methodologies and properties of materials".
4）2002-2006,National High-Tech Research and Development Key Program, “High strength, high ductility magnesium alloys and their applications”.
5）2007-2010,Major Basic Research Project of Shanghai, “Microstructure stress control in forming processes”.
6）2003-2006,Key Basic Research Project of Shanghai, “Deformation mechanism and warm formability of magnesium alloy sheet”.
7）2006-2008,Project from Bao Steel Company, “Digital design platform for ERW pipes cage roll forming processes”.
8）2007-2009,University Research Project (URP) of Ford Motor Company, “Integrated Computational Materials Engineering (ICME) Methodology Development for Alloy Design & Defects Control for Al & Mg Forming”.
9）2003-2006,Project from Nakata MFG Co. Japan, “Research on the Simulation of Roll Forming”.

1） Yinghong Peng, Hu Jie. KBE technology and its application in product design. Shanghai: Press of Shanghai Jiao Tong University, 2007.
2） Yinghong Peng. Simulation of metal forming processes. Shanghai: Press of Shanghai Jiao Tong University,1999.
3） Xionghui Zhou, Yinghong Peng. Morden mold design theory and technique. Shanghai: Press of Shanghai Jiao Tong University, 2000.
4） Peng Yinghong, Yin Zhongwei. A new strategy for direct tool path generation from measured points. International Journal of Production Research, 2005, 43(5):933-944.
5） Peng Yinghong, Luo Yingbing，Li Dayong，Yin Jilong. Constitutive development and the numerical study on the drawability of AZ31 sheet. Materials Science Forum，2005，488-489：645-648.
6） Peng Yinghong, Yin Zhongwei, Direct tool path regeneration for physical object modification from digitized points in reverse engineering. The International Journal of Advanced Manufacturing Technology. 2007, 33 (11-12): 1204-1211.
7） Li Yuming, Peng Yinghong. Fine-blanking process simulation by rigid viscous-plastic FEM coupled with void damage. Finite Elements in Analysis and Design，2003, 39（5-6）：457-472.
8） Peng Yinghong, Li Dayong, Wang Yingchun, Yin Jilong, Zeng Xiaoqin. Numerical Study on the Low Pressure Die Casting of AZ91D Wheel Hub. Materials Science Forum，2005，488-489：393-396.
9） Li Dayong, Peng Yinghong, Yin Jilong. Optimization of metal forming process via a hybrid intelligent optimization technique. Structural and Multidisciplinary Optimization, 2007, 34 (3): 229-241.
10） Peng Yinghong, Chang Qunfeng, Li Dayong, Hu Jie, Zeng Xiaoqin. Numerical Simulation of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet with Variable Blank Holder Force. Key Engineering Materials，2007，340-341：639-644.
11） Peng Yinghong, Zhang Shaorui, Li Dayong. Texture Evolution of FCC Sheet Metal during Deep Drawing Based on Rate Independent FEM Analysis. Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes（Numisheet 2005），2005：557-562.
12） Peng Yinghong, Li Dayong, Luo Yingbing. Roll Forming Simulation with Solid Shell Element. Proceeding of the 8th International Conference on Technology of Plasticity (ICTP 2005). 2005：269-270.
13） Hu Jie, Peng Yinghong, Xiong Guangleng. Knowledge network driven coordination and robust optimization to support concurrent and collaborative parameter design. Concurrent Engineering：Research and Applications. 2007, 15(1): 43-52.
14） Li Dayong, Fei Zhou, Chang Qunfeng and Peng Yinghong. Comparison of FEM and FVM in Numerical Simulation of Complex Aluminum Profile. Transaction of Nonferrous Metal Society of China. 2006, 16(sp3): S1275-S1278.
15） Li Dayong, Zhang Shaorui, Peng Yinghong. Numerical study of influence of anisotropy on flanging earing based on Barlat six-component yield function, Transaction of Nonferrous Metal Society of China, 2003, 13(2): 412-416.
16） Zhou Fei, Su Dan, Peng Yinghong. Ruan Xueyu. FEM and FVM compound numerical simulation of aluminum extrusion processes. Transactions of Nonferrous Metals Society of China, 2003, 13（2）：381-385.
17） Zhang Shaorui, Li Dayong, Luo Yingbing, Peng Yinghong. Analysis of FCC Sheet Metal Forming with Rate-independent Polycrystalline Plasticity FEM, Transactions of Nonferrous Metals Society of China. 2004, 14(2): 362-365.
18） Luo Yingbing, Li Dayong, Peng Yinghong. Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension Transaction of Nonferrous Metal Society of China, 2006, 16(sp): S1630-S1633.
19） Peng Yinghong, Yin Zhongwei. The algorithms for trimmed surfaces construction and tool path generation in reverse engineering. Computers & Industrial Engineering. 2008,54( 3): 624-633.
20） Peng Yinghong, Wang Weiming, Hu Jie, Zhang Kaiyuan, Yin Jilong. A knowledge-based constraints network system for concurrent product design. Proceedings of 2005 IEEE International Conference on Machine Learning and Cybernetics. 2005: 1943-1948.
21） Peng Yinghong, Wang Yingchun, Li Dayong, Zeng Xiaoqin. The Simulation of Magnesium Wheel Low Pressure Casting Based on PAM-CAST, Proceeding of The 8th International Conference on Numerical Methods in Industrial Forming Processes: Numiform2004, Ohio, USA, June 2004, June 2004: 1248-1252.
22） Peng Yinghong, Chang Qunfeng, Li Dayong, Zeng Xiaoqin. Warm Deep Drawing of Square Parts of AZ31 Magnesium Alloy Sheet Adopting Variable Blank Holder Force. AIP Conference Proceeding. 2007，908：563-568.
23） Li Dayong, Peng Yinghong, Yin Zhongwei. Interference detection for direct tool path generation from measured data points. Engineering with Computers. 2006, 22 (1): 25-31.
24） Hu Jie, Peng Yinghong. Tolerance modelling and robust design for concurrent engineering. Journal of Mechanical Engineering Science. 2007, 221: 455-465.
25） Hu Jie, Peng Yinghong, Xiong Guangleng. Parameter coordination and optimization for collaborative design based on constraints network. International Journal of Advanced Manufacturing Technology. 2007, 32 (11-12): 1053-1063.
26） Hu Jie, Peng Yinghong, Li Dayong, Yin Jilong. Robust optimization based on knowledge discovery from metal forming simulation. Journal of Materials Processing Technology. 2007, 187: 698-701.
27） Hu Jie, Peng Yinghong. Collaborative design optimization based on knowledge discovery from simulation. Lecture Notes in Artificial Intelligence. 2006, 4293: 663-673.
28） Hu Jie, Peng Yinghong, Li Dayong, Yin Jilong. Multidisciplinary knowledge modeling from simulation and specification to support concurrent and collaborative design. Lecture Notes in Computer Science. 2007, 4402: 570-578.
29） Hu Jie, Peng Yinghong, Xiong Guangleng. Robust parameter decision-making based on multidisciplinary knowledge model. Lecture Notes on Artificial Intelligences. 2007, 4617: 431-442.
30） Hu Jie, Peng Yinghong. Multidisciplinary knowledge modeling and cooperative design for automobile development. Lecture Notes in Computer Science. 2007, 4674: 304-306.
31） Hu Jie, Peng Yinghong. Knowledge-based cooperative learning platform for three-dimensional CAD system. Lecture Notes in Computer Science. 2007, 4674: 413-419.
32） Hu Jie, Peng Yinghong, Xiong Guangleng; Zhang Shaotong. Robust parameter coordination for multidisciplinary design. Journal of Shanghai Jiaotong University (Science), 2006, 11 E(4): 411-416.（EI检索号：071010471194）
33） Li Dayong, Luo Yingbing, Peng Yinghong. Solid Shell Element and its Application in Roll Forming Simulation. Key Engineering Materials，2007，340-341：347-352.
34） Li Dayong, Luo Yingbing, Peng Yinghong. The Numerical and Analytical Study on Stretch Flanging of V-Shaped Sheet Metal. Journal of Materials Processing Technology. 2007, 189:262-267.
35） Li Dayong, Zhang Shaorui, Peng Yinghong. Investigation of the flange earring of deep-drawing aluminum sheets by rate-independent polycrystalline plasticity finite element analysis. Key Engineering Materials, 2004, 274-276: 559-564.
36） Li Dayong, Yin Jilong, Peng Yinghong, Zhou Fei, Cao Zhaomin. Knowledge acquisition framework in building a mould & die design KBE system. The 8th International Conference on Technology of Plasticity(ICTP 2005), 2005: 95-97.
37） Li Dayong, Chang Qunfeng, Peng Yinghong, Zeng Xiaoqin. Thermo-mechanical coupled simulation of warm stamping of AZ31 magnesium alloy sheet. Materials science forum，2007, 546-549：285-288.
38） Hu Jie, Xiong Guangleng, Peng Yinghong. Parameter coordination and robust optimization for multidisciplinary design. Chinese Journal of Mechanical Engineering. 2006, 19(3): 368-372.
39） Hu Jie, Peng Yinghong, Xiong Guangleng, Zhang Shaotong. Robust parameter coordination for multidisciplinary design. Journal of Shanghai Jiaotong University (Science). 2006, E-11(4): 19-25.
40） Zhang Xianhong, Peng Yinghong, Ruan Xueyu. A web-based cold forging process generation system. Journal of Materials Processing Technology, 2004, 145(1)：1-6.
41） Chang Qunfeng, Peng Yinghong, Li Dayong and Zeng Xiaoqin, Experimental research on warm deep drawing of magnesium alloy sheet by variable blank holder force control. Materials science forum, 2007, 546-549: 285-288.
42） Yang H B, Peng Y H, Ruan X Y, et al. A finite element model for hydrodynamic lubrication of cold extrusion with frictional boundary condition. Journal of Materials Processing Technology, 2005, 161(3): 440-444.
43） Luo Yingbing, Peng Yinghong, Luckey George, Friedman Peter. Finite Element Analysis of an Advanced Superplastic Forming Process Utilizing a Mechanical Pre-form. SAE Paper 2007, No.2007-01-1676.
44） Hu Jie, Xiong Guangleng, Peng Yinghong, Wang Weiming. Parameter coordination for multidisciplinary collaborative design. Proceedings of the IEEE 10th International Conference on Computer Supported Cooperative Work in Design. Nanjing, China. May 3-5, 2006: 369-374.
45） Hu Jie, Yin Jilong, Peng Yinghong, Li Dayong. Knowledge discovery from multidisciplinary simulation to support concurrent and collaborative design. Proceedings of the IEEE 10th International Conference on Computer Supported Cooperative Work in Design. Nanjing, China. May 3-5, 2006: 822-827.
46） Hu Jie, Xiong Guangleng, Peng Yinghong. Multidisciplinary parameter coordination based on constraints network agent modeling. Proceedings of 2006 IEEE International Conference on Machine Learning and Cybernetics. Dalian, China. August 13-16, 2006: 95-100.
47） Hu Jie, Yin Jilong, Peng Yinghong. Knowledge discovery based on multidisciplinary data. Proceedings of 2006 IEEE International Conference on Machine Learning and Cybernetics. Dalian, China. August 13-16, 2006: 1108-1113.
48） Wang Wei-ming, Hu Jie, Peng Yinghong. A knowledge-based parameter consistency management system for concurrent and collaborative design. Journal of Engineering Manufacture. 2007, 221(1): 97-107.
49） Wang Weiming, Li Dayong, Hu Jie, Peng Yinghong, Zhang Yishun, Li Deyuan. Numerical simulation of fluid flow & heat transfer in a plasma spray gun. The International Journal of Advanced Manufacturing Technology. 2005, 26(5): 537-543.
50） Wang Weiming, Hu Jie, Zhou Fei, Li Dayong, Fu, Xiangjun, Peng Yinghong. The study of knowledge based constraints network system (KCNS) for concurrent engineering. Lecture Notes on Artificial Intelligences. 2006, 3930: 268-277.
51） Wang Weiming, Hu Jie, Yin Jilong, Peng Yinghong. An intelligent response surface methodology for modeling of domain level constraints. Journal of Shanghai Jiaotong University (Science). 2006, 11(1): 27-33.
52） Wang Weiming, Hu Jie, Li Dayong, Peng Yinghong, Zhang Xin. Modeling of generalized dynamic constraints network based on simulation and expand approximate method (EAM). Proceedings of 2005 IEEE International Conference on Machine Learning and Cybernetics. 2005: 2777-2782.
53） Wang Weiming, Hu Jie, Yin Jilong, Peng Yinghong. Uncertainty management in the concurrent and collaborative design based on generalized dynamic constraints network (GDCN). Proceedings of the IEEE 10th International Conference on Computer Supported Cooperative Work in Design. Nanjing, China. May 3-5, 2006: 354-359.
54） Chang Qunfeng, Li Dayong, Peng Yinghong, Zeng Xiaoqin. Experimental and numerical study of warm drawing of AZ31 magnesium alloy sheet. International Journal of Machine Tools & Manufacture, 2007, 47: 436–443.
55） Wang Yingchun, Li Dayong, Peng Yinghong, Zeng Xiaoqin, Numerical Simulation of Low Pressure Die Casting of Magnesium Wheel, The International Journal of Advanced Manufacturing Technology, 2007, 3-4: 257-264.
56） Wang Yingchun, Li Dayong, Peng Yinghong, Zhu Liguang. Computational modeling and control system of continuous casting process, International Journal of Advanced Manufacturing Technology. 2007, 33 (1-2): 1-6.
57） Yin Jilong, Li Dayong, Peng Yinghong. Knowledge acquisition from metal forming simulation. International Journal of Advanced Manufacturing Technology. 2006(3-4): 279-286.
58） Luo Chao, Li Dayong, Peng Yinghong and Zuo Tieyong. Research on the key technologies of “Zero Die Trial” design system for aluminum profile extrusion. Transactions of Nonferrous Metals Society of China, 2004, 14 (4): 708-712.
59） Luo Y. B., Luckey S.G., Friedman P.A. and Peng Y. H. Development of an advanced superplastic forming process utilizing a mechanical pre-forming operation. International Journal of Machine Tools and Manufacture, doi:10.1016/j.ijmachtools.2007.12.010.
60） Zhang Shaorui, Chang Qunfeng, Li Dayong, Peng Yinghong，Numerical Analysis of Nano- or Micro-Crystalline Materials during ECAP by Dislocation Evolution Method，Materials science forum, 2007, 546-549: 687-690.
61） Shao Rui Zhang, Da Yong Li, Zhong Wei Yin, Ying Hong Peng, Fei Zhou. Study on Metal Forming by Macro-Micro Combine Numerical Analysis. Key Engineering Materials. 2007, 340-341: 671-676.
62） Y. H. Peng, Q. F. Chang, D. Y. Li. Numerical simulation of warm stamping of AZ31 magnesium alloy sheet based on thermomechanical coupled method. Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Interlaken, Swizerland, 2008: 599-604.
63） Yinghong Peng, Jinmao Jiang, Dayong Li, Jianzeng Han, Jianxin Li. Simulation of cage roll forming process of ERW pipes. International Journal of Materials and Product Technology, 2008, 32(4): 388-405.
64） Yinghong Peng, Ding Tang and Dayong Li, Study on the influence of mandrel type on copper tube rotary draw bending. International Journal of Materials and Product Technology, 2008, 32(4): 406-422.
65） Shaorui Zhang, Weiqin Tang, Yinghong peng, Effect of Slip and twinning systems on the polycrystal plastic model for magnesium alloy, Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Interlaken, Swizerland, 2008: 367-371.
66） D.Y. Li, C.Wang, Y. Peng, C. Tian. Study on the dynamic deformation of dual phase steel sheet. Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Interlaken, Swizerland, 2008: 143-148.
67） Hu L J, Zhang S R, Li D Y, Peng Y H. Numerical analysis of influence of micro-parameters on macro-micromechanical properties of fiber reinforced metal matrix composites, Journal of Materials Processing Technology, 2008, 201(1-3): 736-741.
68） Y.B.Luo, S.G. Luckey, P.A. Friedman, Y. H. Peng. Development of an advanced superplastic forming process utilizing a mechanical pre-forming operation. International Journal of Machine Tools and Manufacture, 2008, 13:1509-1518.
69） Xuan Liang, Jun Li, YingHong Peng，Effect of water quench process on mechanical properties of cold rolled dual phase steel microalloyed with niobium. Materials Letters, 2008, 62(2) 327–329.
70） Liang Xuan , Li Jun , Peng Ying-hong. Properties and Microstructure of One-Step Cold Rolled Steel Strip for Shadow Mask, Journal of Iron and Steel Research, 2008, 15(5): 77-80.

1）Peng Yinghong，Hu Jie. Knowledge based engineering and its application in products, Shanghai Jiao Tong University press，2007
2）Peng Yinghong. Numerical simulation for metal forming process，Shanghai Jiao Tong University press, 1999.
3）Zhou Xionghui，Peng Yinghong. Theories and technologies of Die & Mould design, Shanghai Jiao Tong University press，2000.

Knowledge fusion and innovation design

2007―2011 Chairman of Academic Committee of Plastic Forming Theory and Digialization, China Plastic Forming Acadamy.
2009-2013 Acadamic Committee member of State Key Lab. of Rolling & Automation.

2014, National Science & Technology Award (The 2nd grade)
2013, Moe Science & Technology Award (The 1st grade)
2009, National Teaching Award (The 2nd grade)
2008, Ford Professor Award
2007, Shanghai Science & Technology Award (The 1st grade)
2007, Shanghai Excellent Academic Leader