Selected Publications
Journal paper:
2019:
19-1、He Ji*, Guofeng Han, Li Shuhui*, Danqing Zou, To correlate the phase transformation and mechanical behavior of QP steel sheets, International Journal of Mechanical Sciences, 2019, 152: 198-210
19-2、GU Bin, HE Ji, LI Shu-hui, LIN Zhong-qin. Research progress on anisotropic fracture models and fracture tests for sheet metals. Journal of Plasticity Engineering, 2019.
19-3、SU You-huang，WANG Jun-hui，FENG Yi-shuang，HE Ji, LI Shu-hui. Numerical Simulation and Process Optimization of Dry Stamping Process for Automotive Interior Component. Journal of Plasticity Engineering，2019.
19-4、He, J., Li, S.*, Dong, L., Experiments and FE simulation of edge cracking considering prehardening after blanking process, International Journal of Material Forming, 2019, //doi.org/10.1007/s12289-019-01491-6
19-5、Ji He*, Yongfeng Li, Bin Gu, Shuhui Li*, Effects of reverse loading on forming limit predictions with distortional anisotropic hardening under associated and non-associated flow rules, International Journal of Mechanical Sciences, 2019, 156, 446-461.
19-6、Yongfeng Li, Shuhui Li*, Ji He, Yuan Chen, Lan Yue, Identification methods on blank-die interfacial heat transfer coefficient in press hardening, Applied Thermal Engineering, 2019,152, 865-877
19-7、Gu B, He J*, Li S, Lin Z. Anisotropic fracture modeling of sheet metals: from in-plane to out-of-plane. International Journal of Solids and Structures, 2020,182-183,112-140.
2018:
13、Li Shuhui*, He Ji*, Gu Bin, Zeng Danielle, Xia Z. Cedric, Zhao Yixi, Lin Zhongqin, Anisotropic fracture of advanced high strength steel sheets: Experiment and theory, International Journal of Plasticity, 2018, 103: 95-118
14、Zou Danqing, Li Shuhui*, He Ji, Gu Bin, Li Yongfeng, The Deformation Induced Martensitic Transformation and Mechanical Behavior of Quenching and Partitioning steels under Complex Loading Process, Materials Science & Engineering A, 2018, 715: 243-256.
15、He Ji, Gu B, Li Y, Li S*. Forming Limits Under Stretch-Bending Through Distortionless and Distortional Anisotropic Hardening. ASME Journal of Manufacturing Science and Engineering 2018;140(12):121013-121013-14.
16、He Ji, Shuhui Li*, Shanshuai Wang, Deformation behavior of sandwich hemispherical structure under axial compression at low temperature, Composite Structures, 2018, 203: 267-277
17、He Ji, Wang, Z., Li, S. * et al. Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation, International Journal of Material Forming, 2018, published online
2017:
11、Zou Danqing, Li Shuhui*, He Ji, Temperature and strain rate dependent deformation induced martensitic transformation and flow behavior of quenching and partitioning steels, Materials Science & Engineering A, 2017, 680:54-63.
12、Gu B, He J*, Li S, et al. Cyclic Sheet Metal Test Comparison and Parameter Calibration for Springback Prediction of Dual-Phase Steel Sheets[J]. ASME Journal of Manufacturing Science and Engineering, 2017, 139(9).
to 2016:
1、He J., Xia Z.C.*, Zhu X.H., Zeng D., Li S.H., Sheet Metal Forming Limits Under Stretch-Bending With Anisotropic Hardening, International Journal of Mechanical Sciences, 2013, 75：244-256
2、He J., Xia Z.C.*, Li S.H., Zeng D., M-K Analysis of Forming Limit Diagram Under Stretch-Bending, ASME Journal of Manufacturing Science and Engineering, 2013, 135（04）：041019-1-041019-10
3、He J., Xia Z.C.*, Zeng D., Li S.H., Forming Limits of a Sheet Metal After Continuous-Bending-Under-Tension Loading, ASME Journal of Engineering Materials and Technology，2013，135（03）：031009-1-031009-8
4、He J., Zeng D., Zhu X.H., Xia Z.C.*, Li S.H., Effect of Nonlinear Strain Paths on Forming Limits under Isotropic and Anisotropic Hardening, International Journal of Solids and Structures, 2014, 51：402-415
5、Li S.H.*, He J., Xia Z.C., Zeng D., Hou B., Bifurcation Analysis of Forming Limits for An Orthotropic Sheet Metal, ASME Journal of Manufacturing Science and Engineering, 2014, 136（05）：051005-1-051005-10
6、Li S.H., He J.*, Zhao Y., Wang S., Dong L., Cui R., Theoretical Failure Investigation for Sheet Metals under Hybrid Stretch-Bending Loadings, International Journal of Mechanical Sciences, 2015, 104：75-90
7、Wang S., Li S.H.*, He J., Zhao Y.X., Asymmetric post-buckling behavior of hemispherical shell structure under axial compression, ASME Journal of Engineering Materials and Technology, 2015, 138(1):1154.
8、Li S, Zou D, Xia C, et al. Effect of Strain Rate on Deformation-Induced Martensitic Transformation of Quenching and Partitioning Steels[J]. Steel Research International, 2015, 87(10):1302-1311.
9、Dong L., Li S., He J., et al., Investigation on shearing and local formability of hot-rolled high strength plates. ASME Journal of Manufacturing Science & Engineering,2016.
10、Wang Shanshuai, Li Shuhui*, He Ji, Buckling Behavior of Sandwich Hemispherical Structure Considering Deformation Modes under Axial Compression, Composite Structures, 2016, 163:312-324.
Conference paper:
• He J., Xia Z.C.*, Zeng D., Li S.H., M-K Analysis of Forming Limit Diagram Under Stretch Bending, ASME 2012 International Manufacturing Science and Engineering Conference, 2012.6.4-2012.6.8
• Wang, Z., Li, S., Dong, L., He, J., A grain structure model based on voronoi polygon of non- oriented electrical steel in blanking process, Numisheet 2016 conference, 734(3).
• Zou, D., Li, S., He, J., Cui, R., Failure investigation for QP steel sheets under uniaxial and equal-biaxial tension conditions, Numisheet 2016 conference, 734(3).
