威尼斯娱人城官网

1992-1996 Harbin Institute of Technology, School of Mechanical Engineering, Bachelor
1996-1998 Harbin Institute of Technology, School of Mechanical Engineering, Master
1998-2002 Harbin Institute of Technology, School of Mechanical Engineering,Ph.D

2003-2006 Shanghai Jiao Tong University, School of Mechanical Engineering, Lecture
2006-present Shanghai Jiao Tong University, School of Mechanical Engineering, Asso. Professor
2009-2011 University of Nebraska-Lincoln, CNMR, Post-Doc

High efficient machining of difficult-to-cut materials,
Non-traditional Machining,
Blasting Erosion Arc Machining
micro-EDM

NSFC:Study of Inner mist jetting electric discharge machining
NSFC: Study on high performance contour arc cutting of difficult-to-cut material(2016-2019)
NSFC: Research on high efficiency electrical arc machining of Ti-Al intermetallic alloy and shape and surface quality control(2020-2023)
NSFC: Fundamental study of high speed arc discharge machining (2012-2017)
Design of high performance electrical arc machining machine

First Author SCI Papers:
1. Gu Lin, Li L., Zhao W.S., et al. Electrical discharge machining of Ti6Al4V with a bundled electrode, International Journal of Machine Tools and Manufacture, 2012, 53(1):100-106
2. Gu Lin, Li L., Zhao W.S., et al. An Efficient and Economical Rapid-Tooling Method for Die-Sinking Electrical Discharge Machining, Journal of Manufacturing Science and Engineering, 2011,133(5):.51004(7)
3. Gu Lin, Zhang F.W., Zhao, W.S., et al. Investigation of hydrodynamic arc breaking mechanism in blasting erosion arc machining, CIRP Annals - Manufacturing Technology, 2016, 65(1):233-236
4. Gu Lin, Zhu Y.M.,He. G.J, et al. Coupled numerical simulation of arc plasma channel evolution and discharge crater formation in arc discharge machining, International Journal of Heat and Mass Transfer, 2019,135:674–684
5. Gu Lin, Chen J.P., Xu H., elt al. Blasting erosion arc machining of 20 vol.% SiC/Al metal matrix composites, Int. J. of Advanced Manufacturing Technology, 2016, 87(9): 2775-2784
6. Gu Lin, Chen J.P., Zhu Y.M, et al. Influence of reinforcement particles on the mechanism of the blasting erosion arc machining of SiC/Al composites, International J. of Advanced Manufacturing Technology, 2018, 99(5):1119-1129
7. Gu Lin, Zhu Y.M., Zhang F.W. et al. Mechanism analyzation and parameter optimization of electro discharge machining of titanium-zirconium-molybdenum alloy, Journal of Manufacturing Processes, 2018,32:773-781
8.Gu Lin, Farhadi A., Zhu Y.M., et al. A novel tool design procedure for arc sweep machining technology, Materials and Manufacturing Processes,Accepted.

Corresponding author SCI papers:
1.Modeling study of the hydrodynamic arc breaking mechanism in BEAM, CIRP Annals - Manufacturing Technology, 2018, 67(1):189-192
2.Observation and modeling research of high-velocity flushing effect on the performance of BEAM, Int. J. of Advanced Manufacturing Technology, 2016, 86(1):935-942)
3. A new thermal model considering TIE of the expanding spark for anode erosion process of EDM in water, Int. J. of Advanced Manufacturing Technology, 2016, 82(1):573-582
4. Influence of flushing holes on the machining performance of blasting erosion arc machining, Journal of Engineering Manufacture, 2017, 231(11):1949-1960
5. Precision machining of high aspect-ratio rotational part with wire electro discharge machining, Journal of Mechanical Science and Technology, 2017, 31(3):1391-1399
6. High-efficiency machining of large aspect-ratio rotational parts by rapid contour approaching WEDM, Int. J. of Advanced Manufacturing Technology, 2018,94(9):3577-3590
7. Combined machining of SiC/Al composites based on blasting erosion arc machining and CNC milling, Int. J. of Advanced Manufacturing Technology, 2018, 96(1):111-121
8. High efficiency blasting erosion arc machining of 50 vol.% SiC/Al matrix composites, Journal of Engineering Manufacture, 2018, 232(12):2226-2235
9. Electric arc sweep milling of open channels, International Journal of Advanced Manufacturing Technology, 2019, 102(1): 673-683
10. Observation and analyzation of plasma channel evolution behavior in air flushing electrical arc machining, International J. of Advanced Manufacturing Technology, 2019,100(9):3127-3138
11.High efficiency blasting erosion arc machining of 50 vol.% SiC/Al matrix composites, Journal of Engineering Manufacture, 2018, 232(12): 2226-2235

Undergraduate courses:
1. Manufacturing Technology I (In English)
2. Advanced manufacturing (Chinese)

Graduate course:
1. design and analyze of experiment

23 approved invention patents.

Youth Editor，Advances in Manufacturing
committee member,Chinese Society of Nontrational machining

Most popular Professor, 2012